Command Manual ( For Soliton ) – Port Security-Port Binding
H3C S3100 Series Ethernet Switches
Chapter 1 Port Security Commands
1-1
Chapter 1 Port Security Commands
1.1 Port Security Commands
1.1.1 display mac-address security
Syntax
display mac-address security
[
interface interface-type
interface-number
] [
vlan
vlan-id
] [
count
]
View
Any view
Parameters
Interface interface-type
interface-number
: Specify a port by its type and number, of
which the security MAC address information is to be displayed.
vlan vlan-id
: Specify a VLAN by its ID, of which the security MAC address information is
to be displayed. The value range for the
vlan-id
argument is 1 to 4094.
count
: Displays the number of matching security MAC addresses.
Description
Use the
display mac-address security
command to display security MAC address
entries.
If no argument is specified, the command displays information about all security MAC
address entries.
For each security MAC address entry, the output of the command displays the MAC
address, the VLAN that the MAC address belongs to, state of the MAC address (which
is always security), port associated with the MAC address, and the remaining lifetime of
the entry.
By checking the output of this command, you can verify the current configuration.
Examples
# Display information about all security MAC address entries.
<Sysname> display mac-address security
MAC ADDR VLAN ID STATE PORT INDEX AGING TIME(s)
0000-0000-0001 1 Security Ethernet1/0/20 NOAGED
0000-0000-0002 1 Security Ethernet1/0/20 NOAGED
0000-0000-0003 1 Security Ethernet1/0/20 NOAGED
