Command Manual ( For Soliton ) – Port Security-Port Binding
H3C S3100 Series Ethernet Switches
Chapter 1 Port Security Commands
1-3
Field
Description
AGING TIME(s)
Remaining lifetime of the MAC address entry
mac address(es) found
Number of matching security MAC addresses
1.1.2 display port-security
Syntax
display
port-security
[
interface
interface-list
]
View
Any view
Parameters
interface interface-list
: Specify a list of Ethernet ports of which the port security
configurations are to be displayed. For the
interface-list
argument, you can specify
individual ports and port ranges. An individual port takes the form of
interface-type
interface-number
and a port range takes the form of
interface-type interface-number1
to
interface-type interface-number2
, with
interface-number2
taking a value greater than
interface-number1
. The total number of individual ports and port ranges defined in the
list must not exceed 10.
Description
Use the
display port-security
command to display port security configurations.
If no interface is specified, the command displays the port security configurations of all
Ethernet ports.
The output of the command includes the global configurations (such as whether port
security is enabled on the switch and whether the sending of specified Trap messages
is enabled) and port configurations (such as the security mode and the port security
features).
By checking the output of this command, you can verify the current configuration.
Examples
# Display the global port security configurations and those of all ports.
<Sysname> display port-security
Equipment port-security is enabled
AddressLearn trap is Enabled
Intrusion trap is Enabled
Dot1x logon trap is Enabled
Dot1x logoff trap is Enabled