Command Manual (For Soliton) – 802.1x-System Guard
H3C S3100 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
1-8
Description
Use the
dot1x dhcp-launch
command to specify an 802.1x-enabled switch to launch
the process to authenticate a supplicant system when the supplicant system applies for
a dynamic IP address through DHCP.
Use the
undo dot1x dhcp-launch
command to disable an 802.1x-enabled switch from
authenticating a supplicant system when the supplicant system applies for a dynamic
IP address through DHCP.
By default, an 802.1x-enabled switch does not authenticate a supplicant system when
the latter applies for a dynamic IP address through DHCP.
Related command:
display dot1x
.
Example
# Configure to authenticate a supplicant system when it applies for a dynamic IP
address through DHCP.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] dot1x dhcp-launch
1.1.5 dot1x guest-vlan
Syntax
dot1x guest-vlan
vlan-id
[
interface
interface-list
]
undo dot1x guest-vlan
[
interface
interface-list
]
View
System view, Ethernet port view
Parameter
vlan-id
: VLAN ID of a Guest VLAN, in the range 1 to 4094.
interface-list
: Ethernet port list, in the form of
interface-list=
{
interface-type
interface-number
[
to
interface-type interface-number
] } &<1-10>, in which
interface-type
specifies the type of an Ethernet port and
interface-number
is the
number of the port. The string “&<1-10>” means that up to 10 port lists
can be provided.
Description
Use the
dot1x guest-vlan
command to enable the Guest VLAN function for ports.
Use the
undo dot1x guest-vlan
command to disable the Guest VLAN function for
ports.
After 802.1x and guest VLAN are properly configured on a port:
