Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-35
Examples
# Set the MAC address format of the Calling-Station-Id field to
XX-XX-XX-XX-XX-XX
, in
uppercase.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]radius scheme system
[Sysname-radius-system]calling-station-id mode mode2 uppercase
1.2.4 data-flow-format
Syntax
data-flow-format data
{
byte
|
giga-byte
|
kilo-byte
|
mega-byte
}
packet
{
giga-packet | kilo-packet | mega-packet | one-packet
}
undo data-flow-format
View
RADIUS scheme view
Parameters
data
: Sets the data unit of outgoing RADIUS flows, which can be byte, giga-byte,
kilo-byte, or mega-byte.
packet
: Sets the packet unit of outgoing RADIUS flows, which can be one-packet,
giga-packet, kilo-packet, or mega-packet.
Description
Use the
data-flow-format
command to set the units of RADIUS data flows to RADIUS
servers.
Use the
undo data-flow-format
command to restore the default units.
By default, the data unit and packet unit of outgoing RADIUS flows are byte and
one-packet respectively.
Note that the specified unit of data flows sent to the RADIUS server must be consistent
with the traffic statistics unit of the RADIUS server. Otherwise, accounting cannot be
performed correctly.
Related commands:
display radius scheme
.
Examples
# Specify to measure data and packets in data flows to RADIUS servers in kilo-bytes
and kilo-packets respectively in RADIUS scheme radius1.
<Sysname> system-view
System View: return to User View with Ctrl+Z.