Command Manual (For Soliton) – System Maintenance and Debugging
H3C S3100 Series Ethernet Switches
Chapter 3 Device Management
Commands
3-19
Example
# Disable real-time monitoring of the running status of the system.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] undo system-monitor enable
3.1.18 xmodem get
Syntax
xmodem get
{
file-url
|
device-name
}
View
User view
Parameter
file-url
: Path plus name of a host software file in the Flash, a string of 1 to 64 characters.
device-name
: File name, in the form of unit[NO.]>flash:, which is used to indicate that
the specified file is stored in the Flash of a specified switch.
Description
Use the
xmodem get
command to download files from the local device connected with
the Console port of a switch through XModem. This command can be configured only
when the device logging onto a switch through the Console port.
Note that, the communication parameter settings of the Console port of the switch and
those of the serial port of the local device must be consistent and, the interface type of
the Console port must be AUX.
Example
# Download files through XModem.
<Sysname> xmodem get flash:/config.cfg
**** WARNING ****
xmodem is a slow transfer protocol limited to the current speed settings of
the auxiliary ports.
During the course of the download no exec input/output will be available!
---- ******* ----
