Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-79
z
If you re-execute the command, the new setting will overwrite the old one.
z
You can remove an authorization server setting only when there is no active TCP
connection that is sending authorization messages to the server.
Related commands:
display hwtacacs
.
Examples
# Set the IP address and UDP port number of the secondary authorization server for
HWTACACS scheme hwt1 to 10.163.155.13 and 49 respectively.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] secondary authorization 10.163.155.13 49
1.3.17 timer quiet
Syntax
timer quiet minutes
undo timer quiet
View
HWTACACS scheme view
Parameters
minutes
: Wait time before primary server state restoration, ranging from 1 to 255
minutes.
Description
Use the
timer quiet
command to set the time that the switch waits before it tries to
re-communicate with the primary server and restore the status of the primary server to
active.
Use the
undo timer quiet
command to restore the default wait time.
By default, the switch waits five minutes.
Related commands:
display hwtacacs
.
Examples
# Configure the switch to wait 10 minutes before it tries to restore the status of the
primary server to active.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] hwtacacs scheme hwt1
[Sysname-hwtacacs-hwt1] timer quiet 10