Command Manual (For Soliton) – AAA
H3C S3100 Series Ethernet Switches
Chapter 1 AAA Configuration Commands
1-60
Related commands:
radius scheme
,
primary authentication
,
secondary
authentication
,
primary accounting
,
secondary accounting
.
Examples
# Set the status of the secondary authentication server in RADIUS scheme radius1 to
active
.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname] radius scheme radius1
New Radius scheme
[Sysname-radius-radius1] state secondary authentication active
1.2.28 stop-accounting-buffer enable
Syntax
stop-accounting-buffer enable
undo stop-accounting-buffer enable
View
RADIUS scheme view
Parameters
None
Description
Use the
stop-accounting-buffer enable
command to enable the switch to buffer the
stop-accounting requests that get no response.
Use the
undo stop-accounting-buffer enable
command to disable the switch from
buffering the stop-accounting requests that get no response.
By default, the switch is enabled to buffer the stop-accounting requests that get no
response.
Stop-accounting requests are critical to billing and will eventually affect the charges;
they are important to both users and ISPs. Therefore, the switch should do its best to
transmit them to RADIUS accounting servers. When getting no response to such a
request, the switch should first buffer the request on itself, and then retransmit the
request to the RADIUS accounting server until it gets a response, or the maximum
number of transmission attempts is reached (in this case, it discards the request).
Related commands:
reset stop-accounting-buffer
,
radius scheme
,
display
stop-accounting-buffer
.
