Command Manual (For Soliton) – VLAN
H3C S3100 Series Ethernet Switches
Chapter 1 VLAN Configuration Commands
1-10
1.2 Port-Based VLAN Configuration Commands
1.2.1 display port
Syntax
display port
{
hybrid
|
trunk
}
View
Any view
Parameters
hybrid
: Displays hybrid ports.
trunk
: Displays trunk ports.
Description
Use the
display port
command to display the existing hybrid or trunk ports, if any.
For information about port type configuration, refer to the
port link-type
command.
Examples
# Display the existing hybrid ports.
<Sysname> display port hybrid
The following hybrid ports exist:
Ethernet1/0/1 Ethernet1/0/2
The above information shows the current system has two hybrid ports: Ethernet 1/0/1
and Ethernet 1/0/2.
1.2.2 port
Syntax
port interface-list
undo port interface-list
View
VLAN view
Parameters
interface-list
: List of the Ethernet ports to be added to or removed from the current
VLAN.
In this list, you can specify individual ports and port ranges. An individual port
takes the form of
interface-type interface-number
and a port range takes the form of
interface-type interface-number1
to
interface-type interface-number2
, with