OPERATION
97
4.
If Output was chosen, set output status.
Status
ON, OFF
5.
If Setting was chosen, Set Vset and Fset.
Vset
0 ~ full scale voltage (dependant on
the chosen range; 600V optional)
Fset
45.00 ~ 500.0 Hz (1000Hz optional)
6.
If Preset was chosen, choose which preset
setting should be loaded when the Trigger
Input is set to high(+5V).
Memory
0 ~ 9
Trigger Output
Pin
7.
Go to the
Source
setting to choose what
function or test mode will be able to the trigger
the output pin to pulse high.
None
No source is able to use the trigger
output. Remote trigger commands
are accepted.
Output
The trigger output pin is activated
when the output is turned on or off.
Setting
When the settings change the
trigger output pin is activated.
Preset
When a preset is loaded or saved,
the trigger output pin is activated.
All
The trigger output pin is activated
when any of the settings, presets or
the output are changed.
8.
Go to
Width
to set how long the trigger output
pin is pulsed high for.
Width
1 ~ 60ms
Summary of Contents for APS-7000 Series
