GW Instek APS-7000 Series, User Manual, Page: 184 / 193

APS-7000 Series User Manual
184
Model APS-7050 APS-7100 APS-7200 APS-7300
General
Remote output signal
Pass, Fail, Test-in Process, Trigger in, Trigger out,
OUT ON/OFF
Trigger Out
Maximum low level output = 0.8V
Minimum high level output = 2V
Maximum source current = 8mA.
Trigger In
Maximum low level input voltage = 0.8V
Minimum high level input voltage = 2.0V
Maximum sink current = 8mA.
Sync output signal Output Signal 10 V, BNC Type
Number of Preset 10 (0~9 numeric keys)
Protection OCP, OPP, OTP and Alarm
Environmental Conditions
Operating
temperature range
0 ~ +40 C
Storage temperature
range
-10 ~ +70 C
Operating humidity
range
20 ~ 80% RH (no condensation)
Storage humidity
range
80% RH or less (no condensation)
LCD Display 4.3 inch, 480 (RGB) x 272
Dimensions (mm)
W 430 430 430 430
H 88 88 312 400
D 400 560 650 650
Weight 24Kg 38Kg 90Kg 128Kg
Sequence/Simulation Function
Number of Memories
10 (0~9 numeric keys)
Number of Steps 255 max. (for 1 sequence)
Step Time Setting Range
*8
0.01 ~ 999.99 S
Operation within Step Constant, Keep, Linear Sweep
Parameters
Ouptut Range, Frequency, Waveform (sine wave
only), On Phase, Off Phase, Term
Jump Count (0 ~255), Jump-to, Branch 1, Branch
2, Trigger Output
Sequence Control Start, Stop, Hold, Continue, Branch 1, Branch 2
Interface
Standard USB Host, LAN
USB Host, USB-CDC,
LAN
Optional
GPIB (APS-001)
RS232/ USB CDC(APS-
002)
GPIB (APS-001)
RS232 (APS-007)