APS-7000 Series User Manual
78
Turning the Output On
When the output is turned on, the DUT can be connected to either
the rear panel output or the front panel output.
Warning
Both of these outputs are electrically linked. Only one
DUT should be connected to any one of the outputs at
a time. Using both outputs at the same time is not
supported. Using the front and rear outputs are the
same time could cause dangerous operating
conditions. See page 34 for details about using the
output terminals or sockets.
Turn Output On
Press the
Output
key. The Output
key will light up and ON will be
displayed in the status bar to
indicate that the output is on.
Output
Turn Output Off
Press the
Output
key. The Output
key light will go out and OFF will
be displayed in the status bar to
indicate that the output is off.
Output
Summary of Contents for APS-7000 Series
