Grandstream Networks UCM6200 Series Page 42 User Manual Download

Page: 42 / 469

P a g e

UCM6200 Series User Manual

Version 1.0.20.38

•

Added support foe Ring Group/Call Queue/IVR Display Option for Caller ID. [Replace Display Name |
Replace | Replace Caller ID]

•

Added support for compatibility between backup package from UCM61xx and UCM62xx.
[Backup/Restore]

•

Added support to Detect talking users in conference. [CONFERENCE]

•

Added Support of Mini Bar for PMS. [Mini Bar]

Firmware Version 1.0.11.27

•

Added ability to sort extension status on Web GUI.

•

Added one click enable / disable feature code. [Feature Codes]

•

Added Uruguay time zone support. [Auto]

•

Added distinctive ring tone support. [Configure Call Queue] [Configure IVR] [Create New SIP Extension]

•

Added special character support for SFTP client account. [Data Sync]

•

Added destination directory support for data sync. [Data Sync]

•

Added ring group music on hold. [Configure Ring Group]

•

Added CDR multi-email / time condition support. [CDR]

•

Added blacklist anonymous call block. [Blacklist Configurations]

•

Added ability to sort selected extension in Eventlist. [Event List]

•

Added Banned User list for Web GUI login attempts. [Login Se]

•

Added Email template support. [Email Templates]

•

Added outbound route country restriction.

•

Added external disk usage alert option. [Alert Events List]

•

Added range IP input support for dynamic defense white list. [Dynamic Defense]

•

Added blacklist support for Fail2ban. [Fail2ban]

•

Added ability to reboot device from zero config page. [Discovery]

•

Added GXP1628B template for zero config. [Model Update]

•

Added PIN group support. [PIN Groups]

•

Added PMS support. [PMS]

•

Added call queue custom prompt support. [Configure Call Queue]

•

Added call queue retry time support. [Configure Call Queue]

•

Added Support for DHCP Client List. [DHCP Client List]

Firmware Version 1.0.0.7

•

This is the initial version.

Summary of Contents for UCM6200 Series






















































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands

Grandstream Networks UCM6200 Series, User Manual

Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands