Grandstream Networks UCM6200 Series, User Manual

Page: 420 / 469

P a g e | 419
UCM6200 Series User Manual
Version 1.0.20.38
Alert Contact
This feature allows the administrator to be notified when one of the Alert events mentioned above happens.
Users could add administrator's Email address under Web GUI
→ Maintenance → System Events → Alert
Contact to send the alert notification to an email (Up to 10 Email addresses can be added) or also specify an
HTTP server where to send this alert.
Table 138: Alert Contact
Super Admin
Email Configure the email addresses to send alert notifications to.
Up to 10 email addresses can be added.
Admin Email Configure the email addresses to send alert notifications to.
Up to 10 email addresses can be added.
Email Template Please refer to section Email Templates
Protocol Protocol used to communicate with the server. HTTP or HTTPS.
Default one is
HTTP .
HTTP Server The IP address or FQDN of the HTTP/HTTPS server.
HTTP Server Port HTTP/HTTPS port
Warning Template Customize the template used for system warnings.
By default:
{"action":"${ACTION}","mac":"${MAC}","content":"${WARNING_MSG}"}
Notification
Template Customize the notification template to receive relevant alert information.
By default:
{"action":"${ACTION}","cpu":"${CPU_USED}","memery":"${MEM_USED}","disk":"${
DISK_USED}","external_disk":"${EXTERNAL_DISK_USED}"}
Note:
The notification message with “action:0” will be sent periodically if Notification
Interval is set.
Notification
Interval Modifies the frequency at which notifications are sent in seconds.
No notifications will be sent if the value is "0". Default value:
20
Template
Variables ${MAC} : MAC Address
${WARNING_MSG} : Warning message
${TIME} : Current System Time
${CPU_USED} : CPU Usage
${MEM_USED} : Memory Usage
${ACTION} : Message Type. Refer to [Table 137: Alert Events]
${DISK_USED} : Disk Usage
${EXTERNAL_DISK_USED} : Disk Usage