Grandstream Networks UCM6200 Series, User Manual

Page: 258 / 469

P a g e | 257
UCM6200 Series User Manual
Version 1.0.20.38
Custom Prompt
Record New Custom Prompt
In the UCM6200 Web GUI → PBX Settings → Voice Prompt → Custom Prompt page, click on "Record New IVR
Prompt" and follow the steps below to record new IVR prompt.
Figure 163: Record New IVR Prompt
1.
Specify the IVR file name.
2.
Select the format (GSM or WAV) for the IVR prompt file to be recorded.
3.
Select the extension to receive the call from the UCM6200 to record the IVR prompt.
4.
Click the "Record" button. A request will be sent to the UCM6200. The UCM6200 will then call the
extension for recording the IVR prompt from the phone.
5.
Pick up the call from the extension and start the recording following the voice prompt.
6.
The recorded file will be listed in the IVR Prompt web page. Users could select to re-record, play or
delete the recording.
Upload Custom Prompt
If the user has a pre-recorded IVR prompt file, click on "Upload IVR Prompt" in Web GUI → PBX Settings → Voice
Prompt → Custom Prompt page to upload the file to the UCM6200. The following are required for the IVR prompt
file to be successfully uploaded and used by the UCM6200:
•
PCM encoded.
•
16 bits.
•
8000Hz mono.
•
In .mp3 or .wav format; or raw/ulaw/alaw/gsm file with .ulaw or .alaw suffix.
•
File size under 5M.
•
Filename should not exceed 100 characters.