Grandstream Networks UCM6200 Series Page 277 User Manual Download

Page: 277 / 469

P a g e

276

UCM6200 Series User Manual

Version 1.0.20.38

Table 76: 2-way Intercom Configuration Parameters

Name

Configure paging/intercom group name.

Type

Select "2-way Intercom".

Extension

Configure the paging/intercom group extension.

Replace Display Name

If enabled, the UCM will replace the caller display name with Paging/Intercom
name.

Maximum Call Duration

Specify the maximum call duration in seconds. The default value 0 means no
limit.

Custom Prompt

This option is to set a custom prompt for a paging/intercom group to announce
to caller.

Users can now directly upload custom prompts from this page. They

do not need to be redirected anymore.

Members

Select available users from the left side to the paging/intercom group member
list on the right.

Paging/Intercom
Whitelist

Select which extensions are allowed to use the paging/intercom feature for this
paging group.

Configure 1-way Paging

Figure 177: 1-way Paging

Summary of Contents for UCM6200 Series






















































































































































































































































































































































































































































































Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands

Grandstream Networks UCM6200 Series, User Manual

Search results

Summary of Contents for UCM6200 Series

Reviews:

Related manuals for UCM6200 Series

Brands by name

Popular brands