Grandstream Networks UCM6200 Series, User Manual

Page: 160 / 469

P a g e | 159
UCM6200 Series User Manual
Version 1.0.20.38
to use this password for security purpose.
•
Use Extension as Password.
•
Enter a password to be used on all the extensions in the batch.
Voicemail
Password
Configure the password to access the extension's voicemail. A randomly generated
password is used by default and is highly recommended for security. Only digits are
supported.
Ring Timeout
Configure the number of seconds to ring the user before the call is forwarded to
voicemail (voicemail is enabled) or hang up (voicemail is disabled). If not specified,
the default ring timeout is 60 seconds on the UCM6200, which can be configured in
the global ring timeout setting under Web GUI
→ PBX Settings → Voice
Prompt → Custom Prompt : General Preference. The valid range is between 5
seconds and 600 seconds.
Note:
If the end point also has a ring timeout configured, the actual ring timeout used is the
shortest time set by either device.
Auto Record
Enable automatic recording for the calls using this extension. The default setting is
disabled. The recording files can be accessed under Web GUI
→ CDR → Recording
Files .
Skip Voicemail
Password
Verification
If enabled, users can skip password verification when dialing in via the My Voicemail
feature code. This option is disabled by default.
Music On Hold
Select which Music On Hold class to suggest to extensions when putting them on
hold.
Enable LDAP
If enabled, the batch added extensions will be added to LDAP Phonebook PBX list;
if disabled, the batch added extensions will be skipped when creating LDAP
Phonebook.
Call Duration Limit Configure the maximum duration of call-blocking.
IAX Settings
Max Number of Calls Configure the maximum number of calls allowed for each remote IP address.
Require Call Token
Configure to enable/disable requiring call token. If set to "Auto", it might lock out
users who depend on backward compatibility when peer authentication credentials
are shared between physical endpoints.
The default setting is "Yes".
Other Settings
SRTP Enable SRTP for the call. The default setting is "No".
Fax Mode
Select Fax Mode for this user. The default setting is “None”.
•
None: Disable Fax.
•
Fax Detect: Fax signal from the user/trunk during the call can be detected and