Grandstream Networks UCM6200 Series, User Manual

Page: 431 / 469

P a g e | 430
UCM6200 Series User Manual
Version 1.0.20.38
Before accessing the API, the administrators need enable API and configure the access/authentication
information on the UCM6200 first. The API configuration parameters are listed in the table below.
Table 142: API Configuration Files
Enable Enable/Disable API. The default setting is disabled.
TLS Bind Address Configure the IP address for TLS server to bind to. "0.0.0.0" means binding to all
interfaces. The port number is optional, and the default port number is 8443. The IP
address must match the common name (host name) in the certificate so that the TLS
socket will not bind to multiple IP addresses. The default setting is 0.0.0.0:8443.
Username Configure the Username for API Authentication.
Password Configure the Password for API Authentication.
TLS Private Key Upload TLS private key. The size of the key file must be under 2MB. This file will be
renamed as 'private.pem' automatically.
TLS Cert Upload TLS cert. The size of the certificate must be under 2MB. This is the certificate
file (*.pem format only) for TLS connection. This file will be renamed as
"certificate.pem" automatically. It contains private key for the client and signed
certificate for the server.
Permitted IPs Specify a list of IP addresses permitted by API. This creates an AIP-specific access
control list. Multiple entries are allowed.
For example, "192.168.5.20/255.255.255.255" denies access from all IP addresses
except 192.168.5.20.
The default setting is blank, meaning all IPs will be denied. Users must set permitted
IP address before connecting to the API.
Reset Certificates
Press button to restore UCM’s default certificates.
For more details on CDR API (Access to Call Detail Records) and REC API (Access to Call Recording Files),
please refer the document in the link here:
http://www.grandstream.com/sites/default/files/Resources/ucm6xxx_cdr_rec_api_guide.pdf