USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 42/60
2 5 0.0
Enter the value of the Y axis
position, aligning it to the
decimal point displayed
0 0 3 0 0.0
*
02 02
0 1
*
Press
to confirm the value and go on
setting the repetitions
02 02
Enter the number of repetitions (8).
0 0 0 0 0.0
*
Press
to confirm and go on setting the
third cycle
0.0
03 02
0 0 4 5 0.0
*
Enter the value of the X axis
position, aligning it to the
decimal point displayed
0.0
03 02
4 5 0.0
Press
to confirm the value and go on
setting the Y axis
0 0 0 0 0.0
*
03 02
4 5 0.0
Enter the value of the Y axis
position, aligning it to the
decimal point displayed
0 0 5 0 0.0
*
03 02
0 1
*
Press
to confirm the value and go on
setting the repetitions
03 02
Enter the number of repetitions (15).
0 0 0 0 0.0
*
Press
to confirm and go on setting the
fourth cycle
0.0
04 02
5 0.0
Press
to end programming and display
the program’s cycles
1 0 0.0
01 02
Note: the led of the P key is on to indicate that the instrument is in “program view” mode.
5 0.0
Or press
to quit and go back to program
setting
2 0 0.0
01 01*
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
