Givi Misure THESI 320, User Manual

Page: 13 / 60

USER MANUAL POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 13/60
Parameter 23 – SETTING OF FAST MOVEMENT ± 10 V OUTPUT PERCENTAGE
Parameter 24 – MM/INCH CONVERSION
Parameter 25 – SELECTING “POSITION WITH ACC./DEC. RAMPS” OPTION
Parameter 26 – SETTING OF ACCELERATION TIME
Parameter 27 – SETTING OF DECELERATION TIME
Parameter 80 – PARAMETERS’ ACCESS PASSWORD MODIFICATION
Parameter 89 – INSTRUMENT DIAGNOSTICS
Parameter 90 – RESERVED
Example of parameter selection and mofication
0 0 0 0 0 0
*
Press
for 2 seconds. The display will
show
P --
0 0 0 0 0 0
*
Press
if the current password is the one
set by the Manufacturer
P --
or enter the selected password (see parameter 80).
4 0.0
Confirm with
key the display will show the value of
the first parameter, e.g.
1 2 0.0 P 01
d i r -
Press
to select the desired parameter,
e.g.
d i r - P 02
Note: in this phase, it is possible to use also keys 2 and 4 to select parameters more
easily.
d i r -
Press
and/or
to select the axes to
be modified
d i r - P 02
Note: it is possible to press the ENTER key without selecting any axis. In this case, the
instrument will consider both axes to be modified.
d i r -
*
Press
to confirm the selection and
enter its settings
d i r - P 02
Set the configuration parameter (X axis) following the instructions provided below in the
manual.
d i r -
Press to confirm the value
d i r - P 02