USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 43/60
The number of the first available program will flash (e.g. program 01).
5 0.0
Press
to quit machining program
setting
2 0 0.0
Notes:
1) To cancel an entire machining program, go on the first cycle in “program view” mode
and press the CLR key for 4 seconds.
2) To cancel a part of the machining program, select the number of the cycle with which
you want to start and press the CLR key for 4 seconds. All the cycles up to the end of
the program will be cancelled.
3) In order to run a program correctly, make sure to program consecutively its cycles.
Example: displaying program 02 already stored
5 0.0
Press
to enter program setting
2 0 0.0
01 01*
Note: the led of the P key is flashing to indicate that the instrument is in “program edit” mode.
The number of the first available program will start flashing (e.g. program 01).
Enter the number of the program to be displayed (e.g. program 02).
5 0.0
Press
to confirm the selected program
and enter its settings
1 0 0.0
01 02
Note: the led of the P key is on to indicate that the instrument is in “program view” mode.
2 5 0.0
Press
to display all the program cycles
(1-20) in sequence
3 0 0.0
02 02
1 5
Press
to display the repetitions of a
cycle, e.g. cycle 3
03 02
o F F
Press
to display the programmed
status of the AUX outputs
o F F
03 02
5 0.0
Press
to go back to the program cycles
display
1 0 0.0
01 02
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
