USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 14/60
If previously selected, the instrument goes automatically to the parameter setting for the Y
axis. Set the parameter configuration, following the instructions provided below in the
manual.
d i r -
Press
to confirm the value and go back
to parameters selection
d i r - P 02
1.0 0 0 0 0
Press
to select another parameter, e.g.
1.0 0 0 0 0 P 03
4 0.0
Or press
to quit configuration and go back
to the positions display
1 2 0.0
)
AT ANY TIME, IT IS POSSIBLE TO QUIT THE PARAMETERS SETTING, BY
PRESSING THE STOP KEY.
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
