USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 39/60
In this phase, it is possible to test also the auxiliary outputs (AUX, END PROG, OK POS,
etc.). To check the ON/OFF status of the outputs, press the corresponding key:
Press
to switch the AUX output (MACHINE OUTPUT)
Press
to switch the END PROG output (MACHINE OUTPUT)
Press
to switch the OK POS output (MACHINE OUTPUT)
Press
to switch the M-S/A output (MACHINE OUTPUT)
Press
to switch the AUX output (X OUTPUT)
Press
to switch the AUX output (Y OUTPUT)
Note: to check the outputs used to move the axes (EN MOV, SLOW, FAST, FEED,
BACK), it is necessary to be in MANUAL operation.
_ _ _ _ _ _
Press
to quit testing and go back to
parameters selection
_ _ _ _ _ _ P 89
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
