USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 44/60
If the positions, the repetitions or the status of the AUX outputs of a cycle are to be
modified, select the concerned value.
4 5 0.0
Press
to go back to the program cycles
display
5 0 0.0
03 02
4 5 0.0
Press
to select the cycle to be
modified, e.g. cycle 3
5 0 0.0
03 02
0 0 0 0 0.0
*
Press
to enter the program storage
mode
5 0 0.0
03 02*
Note: the led of the P key is flashing to indicate that the instrument is in “program edit” mode.
Enter the new desired values and confirm them with the ENTER key.
4 6 0.0
Press
to quit program storage mode
5 1 0.0
03 02
Note: the led of the P key is on to indicate that the instrument is in “program view” mode.
At any time, it is possible to:
5 0.0
Press
to quit and go back to program
setting
2 0 0.0
01 01*
The number of the first available program will start flashing (e.g. program 01).
5 0.0
Press
to quit machining program
setting
2 0 0.0
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
