USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 31/60
Enter the desired percentage value.
3 0
Press
to confirm the value and
enter the Y axis setting
0 0 0 0 0 0
*
P 22
Enter the desired percentage value.
3 0
Press
to confirm the value and go back
to parameters selection
3 0 P 22
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 23
– SETTING OF FAST MOVEMENT ± 10 V OUTPUT PERCENTAGE
With this parameter it is possible to set the percentage value to be applied on the ± 10 V
output (optional) for the axis movement at high speed. The value is applied both in positive
and negative direction.
Example of value setting X axis = 100% Y axis = 100%
5 0
Press
to select the parameter
(see PARAM. SELECTION)
5 0 P 23
5 0
Press
and
to select both axes
5 0 P 23
0 0 0 0 0 0
*
Press
to confirm the selection and
enter the X axis setting
5 0 P 23
Enter the desired percentage value.
1 0 0
Press
to confirm the value and
enter the Y axis setting
0 0 0 0 0 0
*
P 23
Enter the desired percentage value.
1 0 0
Press
to confirm the value and go back
to parameters selection
1 0 0 P 23
Summary of Contents for THESI 320
Page 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Page 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Page 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Page 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
