Field
Description
•
J 8 3
: The user's own exten-
sion is used as the Outgoing Signalisation. This option is
available when there is a point-to-point configuration or a SIP
provider with direct dialling.
•
3""
: No Outgoing Signalisation is sent. In this case,
the switchboard uses the port's main number.
•
*5+" 1 ,
: For a FXO port, the phone num-
ber configured is already assigned as the Outgoing Signal-
isation and is displayed.
•
*6 ,
: When more than one number has been
configured, you can select a number that you wish to use as
the Outgoing Signalisation.
Select the
icon to specify for each internal number (indicated in the table by Internal
Number and Displayed Description) which number shall be displayed for outgoing calls.
Here, for each configured external connection, select one of the numbers configured for
this purpose.
If more than one external connection has been configured, you can specify the procedure
for outgoing calls. When an external line is engaged, the order of the entries determines
the sequence in which the other lines assigned will be used to dial.
The configured Outgoing Signalisation can be hidden for each outgoing line; to do so,
put a tick under Hide Number in the relevant row.
If you wish to move an entry in the list displayed, select the
icon in the relevant row. A
new window opens.
The selected entry is displayed under External Connection, here e. g.
3K
.
Proceed as follows to move the selected entry:
(1)
Under Move, select in the list the entry relative to which you wish to move the selec-
ted entry, here e. g.
36'64"K
.
(2)
Select whether you want to insert the entry
4
or
8
the selected entry in the
list, here e. g.
4
.
(3)
Select Copy.
The entries display in the changed order.
(4)
If the list contains more than two entries, move other entries if you wish.
The sequence configured here overwrites the setting that is assigned by the permission
Gigaset Communications GmbH
5 Numbering
hybird 120 Gigaset Edition
87
