Field
Description
•
3
: You enter a static IP address.
Default Route
Select whether the route to this connection partner is to be
defined as the default route.
The function is enabled with
"
.
The function is enabled by default.
Create NAT Policy
Specify whether Network Address Translation (NAT) is to be
activated.
The function is enabled with
"
.
The function is enabled by default.
Local IP Address
Only if IP Address Mode =
3
Enter the static IP address of the connection partner.
Route Entries
Only if IP Address Mode =
3
Define other routing entries for this connection partner.
Add new entries with Add.
•
> 6 ""!!
: IP address of the destination host or
network.
•
!0
: Netmask for Remote IP Address If no entry is
made, your device uses a default netmask.
•
$
: The lower the value, the higher the priority of the
route (range of values
...
). The default value is
.
The menu Advanced Settings consists of the following fields:
Fields in the Advanced Settings menu
Field
Description
Block after connection
failure for
Enter the wait time in seconds before the device should try
again after an attempt to set up a connection has failed. The
default value is
D
.
Maximum Number of
Dialup Retries
Enter the number of unsuccessful attempts to setup a connec-
tion before the interface is blocked.
Gigaset Communications GmbH
12 WAN
hybird 120 Gigaset Edition
235
