Field
Description
Possible values:
•
3 #$3&
: Only for point-to-multipoint con-
nections.
•
6'6 (!
: Only for point-to-point connections.
•
6'6 +1
: Only for point-to-point connections.
•
6'6 "" $3
: Only for point-to-point connections.
Displayed Name
In general, you enter the name to be displayed for this number
in the called system telephone's display.
Für Type of Number =
6'6 (!
this field displays
the name of the connection.
Single Number (MSN)
Here, enter the MSN for a point-to-multipoint connection.
P-P Base Number
Here, enter the number for the point-to-point connection
(without direct dial number).
P-P DDI Exception
Here, enter the direct dial exception for a point-to-point connec-
tion.
Note: Only enter the extension according to your extension
number range that should be routed to differing internal sub-
scriber numbers. Direct dial at the point-to-point connection al-
ways proceeds to the subscriber whose number was dialled
along as extension. E. g. the internal subscriber has the num-
ber
D
. If this subscriber is called from outside on
C-DF' D
, the call is signalled at his telephone. However, if
with direct dial
D
a subscriber with the number
EEE
is to be
called, enter
EEE
as the exception number. In Incoming Dis-
tribution you then assign the exception number to the sub-
scriber with the number
D
. You can subsequently perform ad-
ditional settings in Incoming Distribution.
P-P Additional MSN
Here, enter an additional MSN for a point-to-point connection.
With some providers, it's possible to also transmit a point-
to-multipoint number on a point-to-point connection in parallel
to the direct dial number; e.g. a fax number pre-existing setup
of a point-to-point connection, or the old point-to-multipoint
number.
5 Numbering
Gigaset Communications GmbH
80
hybird 120 Gigaset Edition
