Field
Description
dress/Netmask
#3 )&
and NAT method =
!
Enter the destination IP address and corresponding netmask of
the original data packets, as the case arises.
Destination Port/
Range
Only for Type of traffic =
#3 )&
, NAT
method =
!
, Service =
!'""
and Pro-
tocol =
)6
,
=6
,
)6A=6
or Type of traffic =
+"
# )&
, Service =
!'""
and Protocol =
)6
,
=6
,
)6A=6
Enter the destination port or the destination port range of the
original data packets. The default setting
''
means that
the port remains unspecified.
In the NAT Configuration ->Replacement Values menu you can define, depending on
whether you're dealing with inbound or outbound data traffic, new addresses and ports, to
which specific addresses and ports from the NAT Configuration ->Specify original
traffic menu can be translated.
Fields in the menu Replacement Values
Field
Description
New Destination IP Ad-
dress/Netmask
Only for Type of traffic =
#! )&
Enter the destination IP address and corresponding netmask to
which the original destination IP address is to be translated.
New Destination Port
Only for Type of traffic =
#! )&
,
Service =
!'""
and Protocol =
)6
,
=6
,
)6A
=6
Leave the destination port as it appears or enter the destination
port to which the original destination port is to be translated.
Select
to leave the original destination port. If you
disable
, an input field appears and you can enter a
new destination port.
is active by default.
New Source IP Ad-
dress/Netmask
Only for Type of traffic =
#3 )&
and
NAT method =
!
Enter the source IP address to which the original source IP ad-
Gigaset Communications GmbH
10 Networking
hybird 120 Gigaset Edition
199
