Field
Description
•
66A%6
: Primarily run CHAP, otherwise PAP.
•
$3'%64
: Only run MS-CHAP version 1 (PPP Microsoft
Challenge Handshake Authentication Protocol).
•
66A%6A$3'%6
: Primarily run CHAP, on denial then
the authentication protocol required by the connection part-
ner. (MSCHAP version 1 or 2 possible.)
•
$3'%64
: Run MS-CHAP version 2 only.
•
: Some providers use no authentication. In this case,
select this option.
Encryption
Only for Authentication =
$3'%64
If necessary, select the type of encryption that should be used
for data traffic to the connection partner. This is only possible if
STAC or MS-STAC compression is not activated for the con-
nection. If Encryption is set, the remote terminal must also
support it, otherwise a connection cannot be set up.
Possible values:
•
(default value): MPP encryption is not used.
•
"
: MPP encryption V2 with 128 bit is used to RFC
3078.
•
"8! 1
: MPP encryption V2 with 128 bit is
used as compatible with Microsoft and Cisco.
Callback Mode
Select the Callback Mode function.
Possible values:
•
(default value): Your device does not call back.
•
4
: Select one of the following options:
•
666
: Your device calls the connection
partner to request a callback.
•
"8! $"
: Your device calls the connec-
tion partner to request a callback via CBCP (Callback Con-
trol Protocol). Needed for Windows clients.
•
6!!4
: Select one of the following options:
•
666 G
: Your device calls back im-
mediately when requested to do so by the connection part-
ner.
Gigaset Communications GmbH
12 WAN
hybird 120 Gigaset Edition
245
