GeoVision GV-BL110D, User Manual, Page: 93 / 393

PTZ Camera
75
5
Starting and Stopping a Preset Point
To start a Preset movement, click the Option button (No. 6, Figure 5-15),
select Preset Go , and select a Preset number which has been set
previously.
Alternatively, you may use the number pad on the PTZ control panel to
enable a Preset movement:
1 Click the Show Preset button (No. 7, Figure 5-15) to open the
number pad.
2 Click the number of Preset point.
3 Click to start.
To stop a Preset movement, click the Home button (No. 3, Figure 5-15) or
click one of the Pan / Tilt Control button (No. 2, Figure 5-15).