manualshive.com logo in svg

GeoVision GV-BL110D, User Manual, Page: 68 / 393

Share
Download
GeoVision GV-BL110D User Manual Download Page 68

 

 

50 

4. 

Adjust for image clarity using GV-IP Device Utility. For details, see 

10.2 Adjusting Image Clarity

. 

5. 

Insert a micro SD/SDHC card into the memory card slot. 

         

 

                    

Figure 4-19

 

6. 

Slightly push the camera module back and fasten the fixing screw. 

7. 

Replace a new silica gel bag to the camera module and fasten the 

camera’s cover immediately. 

 

Note: 

The silica gel loses its effectiveness after you open the dry 

camera. To prevent the lens from fogging up, it is highly recommended 

to replace the silica gel bag every time when you open the camera. 

Summary of Contents for GV-BL110D










































































































































































































































































































































































































Reviews:

No comments