GeoVision GV-BL110D User Manual Download Page 264

Page: 264 / 393

246

Bullet Camera

Unplug the power cable and the network cable to start.

Loosen the camera’s cover and remove the

Silica Gel Bag

3. Unscrew

the

Fixing Screw

and slightly pull out the camera module.

Figure 14-8

Press and hold the

Default

button for 50 seconds while plugging the

power cable.

Figure 14-9

5. Release

the

Default

button and the process of loading default values

is completed.

Slightly push the camera module back and fasten the

Fixing Screw

Replace a new

Silica Gel Bag

and fasten the camera’s cover

immediately.

Summary of Contents for GV-BL110D










































































































































































































































































































































































































Search results

Summary of Contents for GV-BL110D

Reviews:

GeoVision GV-BL110D, User Manual, Page: 264 / 393

Search results

Summary of Contents for GV-BL110D

Reviews: