GeoVision GV-BL110D, User Manual, Page: 152 / 393

134
10.2 Adjusting Image Clarity
Note the procedures described in this section only apply to Box Camera,
GV-MFD110, Bullet Camera, PT Camera, Vandal Proof IP Dome and
Fixed IP Dome. To adjust focus of a PTZ camera, refer to
5.6 Focus
Adjustment ; for Cube Camera, refer to Camera Adjustment in 11.2.2 The
Control Panel on the Live View Window .
After you have connected your GV-IPCAM H.264 to the network, follow the
steps below to adjust for image clarity.
1. Make sure you have installed the latest GV-IP Device Utility program
included on the
GV-IPCAM H.264 Software CD .
Note: The PC installed with GV-IP Device Utility must be under the
same LAN with the GV-IPCAM H.264 you wish to configure.
2. On the GV-IP Utility window, click the button to search for the IP
devices connected in the same LAN. Click the IP Address of the
camera you desire. A drop-down list appears.
Figure 10-2