GeoVision GV-BL110D User Manual Download Page 124

Page: 124 / 393

106

7.5.2 Power Connection

There are two ways to supply power to the camera:

•

Use a Power over Ethernet (PoE) adapter to connect the camera to the

network, and the power will be provided at the same time.

•

Use the supplied 3-pin Terminal Block and power adapter. Follow the

steps below to connect the Terminal Block and the power adapter.

Insert the thin black wire of the Vandal Proof IP Dome to the left-side

pin of the 3-Pin Terminal Block and the red wire to the right-side pin.

Figure 7-21

Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.

Figure 7-22

Summary of Contents for GV-BL110D










































































































































































































































































































































































































Search results

Summary of Contents for GV-BL110D

Reviews:

GeoVision GV-BL110D, User Manual, Page: 124 / 393

Search results

Summary of Contents for GV-BL110D

Reviews: