GeoVision GV-BL110D User Manual Download Page 168

Page: 168 / 393

150

D/N:

Sets the light sensor’s sensitivity to switch between day mode and

night mode. The value 5 is the most light-sensitive. For details, see

D/N

Special View Settings

12.1.1 Video Settings

[GPS]

For details

12.8.2 GPS Map Settings

[Download]

Allows you to install the programs from the hard drive.

Note:

GV-PTZ010D only contains the

Gamma

feature.

Saturation

is only available in GV-BX110D, GV-MFD110,

GV-BL110D and GV-PT110D.

Tungsten Lamp

is only available in GV-BX110D, GV-MFD110,

GV-BL110D and GV-PT110D.

D/N

is not available in GV-BX110D, Mini Fixed Dome,

GV-BL110D, GV-PTZ010D, GV-PT110D, and Cube Camera.

Summary of Contents for GV-BL110D










































































































































































































































































































































































































Search results

Summary of Contents for GV-BL110D

Reviews:

GeoVision GV-BL110D, User Manual, Page: 168 / 393

Search results

Summary of Contents for GV-BL110D

Reviews: