Administrator Mode
195
12
To enable the Center V2 connection:
1.
Activate Link:
Enable the monitoring through Center V2.
2.
Host Name or IP Address:
Type the host name or IP address of
Center V2.
3.
Port Number:
Match the port to the Port 2 value on Center V2. Or keep
the default value 5551.
4.
User Name:
Type a valid username to log into Center V2.
5.
Password:
Type a valid password to log into Center V2.
6. Click
Apply.
The Connection Status should display “Connected” and
connected time.
You can also find the following options on this Center V2 setting page:
Cease motion detection messages from:
Stops notifying Center V2
of motion-triggered events.
Cease input trigger messages from:
Note this function is not
available for
Mini Fixed Dome
and
Cube Camera
.
Stops notifying
Center V2 of input-triggered events.
Enable schedule mode:
Starts the monitoring through Center V2
based on the schedule you set in the
Select Schedule Time
section.
Refer to
12.5 Recording Schedule
for the same settings.
For related settings to activate the monitoring through Center V2, see
12.1.2 Motion Detection, 12.2.1 Input Setting
, and
16.1 Center V2
.
Summary of Contents for GV-BL110D
