GeoVision GV-BL110D, User Manual, Page: 220 / 393

202
1. Activate Link : Enable the connection to the GV-Video Gateway / GV-
Recording Server.
2. Host Name or IP Address : Type the host name or IP address of the
GV-Video Gateway / GV-Recording Server.
3. Port Number : Match the communication port on the GV-Video
Gateway / GV-Recording Server. Or keep the default value 50000.
4. User Name : Type a valid user name to log into the GV-Video
Gateway/GV-Recording Server.
5. Password : Type a valid password to log into the GV-Video Gateway /
GV-Recording Server.
6. Click Apply . The Connection Status should display “Connected” and
the connected time.
You can also find these options on this GV-Video Gateway / GV-Recording
Server setting page:
„
Cease motion detection messages from : Stop sending the videos
of motion detection from the selected stream(s).
„
Enable schedule mode: Enable the GV-Video Gateway / GV-
Recording Server connection on the schedule you set in the Select
Schedule Time section. Refer to
12.5 Recording Schedule for the
same settings.