GeoVision GV-BL110D, User Manual, Page: 234 / 393

216
Browse to locate the Certificate and Private Key files and type the
password if the .pem files are protected by password. Click Apply . The
Web interface will be restarted and you will need to log in again.
Note: The .pem file format is supported by Certificate and Private Key.
[GV-IPCAM Streaming Port Settings] The VSS port enables connecting
the camera to the GV-System. The default setting is 10000.
[UPnP Settings] UPnP (Universal Plug & Play) is a networking
architecture that provides compatibility among networking equipment,
software and peripherals of the 400+ vendors that are part of the Universal
Plug and Play Forum. It means that they are listed in the network devices
table for the operating system (such as Windows XP) supported by this
function. Enabling this function means you can connect to the camera
directly by clicking on the camera listed in the network devices table.
[QoS Settings] Note this function is not available in GV-BX110D ,
GV-MFD110 , GV-BL110D, GV-PTZ010D and GV-PT110D . The Quality of
Service (QoS) is a bandwidth control mechanism that guarantees delay-
sensitive data flows such as voice and video streams, obtain a certain
amount of bandwidth to keep the streaming smooth.
To apply QoS to GV-IPCAM H.264, all network routers must support QoS
and QoS must be enabled on these devices. To enable the QoS on GV-
IPCAM H.264, enter a Differentiated Services Code Point (DSCP) value.
This value is a field in an IP packet that enables different levels of services
for the network traffic. When the video stream from GV-IPCAM H.264
reaches a router, the DSCP value will tell the router what service level to
be applied, e.g. the bandwidth amount. This value ranges from 0 to 63 in
decimal format. The default value is 0, meaning QoS is disabled.