GeoVision GV-BL110D, User Manual, Page: 69 / 393

Bullet Camera
51
4
4.4.4 Installing the Sun-Shield Cover
After setting up the Bullet Camera, now you can install the sun-shield cover
to the camera.
1. Fasten the hexagon screws either on top or below the camera.
Figure 4-20
2. Put the sun-shield cover on top of hexagon screws. Make sure to aim
the rear hexagon screw at the edge of the sun-shield cover’s aperture
for optimal sun-shield performance.
Figure 4-21
3. Fasten the Philips head screws with the plastic screw spacers.
Figure 4-22