GeoVision GV-BL110D, User Manual, Page: 231 / 393

Administrator Mode
213
12

Access Point Survey: Click this button to search all the available
Access Points (Infrastructure mode) and wireless stations (AD-Hoc
mode) within the range of your WLAN card.
„
Authentication Type: Select one of these network authentication and
data encryption: Disable, WEP, WPAPSK-TKIP, WPAPSK-AES,
WPA2PSK-TKIP or WPA2PSK-AES .

Disabled: No authentication is needed within the wireless network.

WEP (Wired Equivalent Privacy): A type of data encryption.
Type up to four WEP Keys in HEX or ASCII format. Note that if
you use HEX format, only digits 0-9 and letters A-F, a-f are valid.

WPAPSK-TKIP and WPA2PSK-TKIP: Type WPA-PSK (Pre-
Shared Key) for data encryption.

WPAPSK-AES and WPA2PSK-AES: Type WPA-PSK (Pre-
Shared Key) for data encryption.
Note:
1. Your encryption settings must match those used by the Access Points
or wireless stations with which you want to associate.
2. When you lose the wireless access, you can still access the unit by
connecting it to a LAN and using the default IP address 192.168.0.10.