
Recording and Playback
235
13
13.2.3 Access to the Recorded Files through FTP
Server
The built-in FTP Server allows you to download the recorded files saved on
the memory card. You can play back the downloaded files of AVI format
with Media Player. For details to download files, see [Act as FTP Server],
12.3.2 FTP
.
Note:
To play back videos, ensure you have installed Geovision codec
on the computer. The codec is available on the software CD. If you have
installed the Remote Playback player on the computer, it is not required
to install the codec.
13.2.4 Playback of Daylight Saving Time Events
On GV-System, you can retrieve the events recorded during the Daylight
Saving Time (DST) period from the GV-IPCAM H.264 for playback. You
can also connect the memory card to GV-System for playback.
The following instructions describe how to retrieve the recorded files from
the GV-IPCAM H.264 over network. If you like to use the memory card for
playback, first follow the instructions in
13.2.1 Playback Using the Memory
Card t
o load the recorded files to ViewLog, and then follow Steps 4-5
below to play back DST events.
1.
The camera must allow the remote access with
ViewLog Server
activated. See
12.3.7 ViewLog Server
.
Summary of Contents for GV-BL110D
