GeoVision GV-BL110D, User Manual, Page: 215 / 393

Administrator Mode
197
12
3. Port Number: Match the port to the Port 2 value on VSM. Or keep
the default value 5609.
4. User Name: Type a valid username to log into VSM.
5. Password: Type a valid password to log into VSM.
6. Click Apply. The Connection Status should display “Connected” and
connected time.
These options you can also find on this VSM setting page:
„
Cease motion detection messages from: Stops notifying VSM of
motion-triggered events.
„
Cease input trigger messages from: Note this function is not
available for Mini Fixed Dome and Cube Camera . Stops notifying
VSM of input-triggered events.
„
Enable schedule mode: Starts the monitoring through VSM based
on the schedule you set in the Select Schedule Time section. Refer
to 12.5 Recording Schedule for the same settings.
For related settings to activate the monitoring through VSM, see 12.1.2
Motion Detection and 12.2.1 Input Settings, and 16.2 VSM .