GeoVision GV-BL110D, User Manual, Page: 229 / 393

Administrator Mode
211
12
[LAN Configuration]
Note wireless option is only available in GV-CBW120 / 220. According to
the network environment, select
Wired or Wireless . Before enabling the
Wireless , set up WLAN configuration first. For setup details, see 12.7.2
Wireless Client Mode .
[LAN Configuration]
„
Dynamic IP address: The network environment has a DHCP server.
This option should only be enabled if you know which IP address the
camera will get from the DHCP server, or you have obtained a domain
name from the DDNS service provider that always links to the
camera’s changing IP address.
„
Static IP address: Assign a static IP or fixed IP to the camera. Type
the camera’s TCP/IP and DNS parameters in the Configure
connection parameters section.
„
PPPoE: The network environment is xDSL connection. Type the
Username and Password provided by ISP to establish the connection.
If you use the xDSL connection with dynamic IP addresses, first use
the DDNS function to obtain a domain name linking to the camera’s
changing IP address.
[Configure connection parameters]
Type the camera’s IP address, Subnet Mask, Router/Gateway, Primary
DNS server and Secondary DNS server.
Parameters Default
IP address 192.168.0.10
Subnet Mask 255.255.255.0
Router/Gateway 192.168.0.1
Primary DNS server
192.168.0.1
Secondary DNS server 192.168.0.2
For details on Dynamic DNS Server Settings
, see 12.7.3 Advanced TCP/IP.