GeoVision GV-BL110D, User Manual, Page: 30 / 393

12
No. Name Description
1 Audio Out Connects a speaker for audio output.
2 Audio In Connects a microphone for audio input.
3 Default
Resets all configurations of the GV-IPCAM
H.264 to the default factory settings. See
14.3 Restoring to Factory Default Settings .
4 Memory Card Slot
Inserts a micro SD/SDHC card to store
recording data.
5 Video Out
Connects to a portable monitor for setting
the focus and angle of Box Camera during
initial installation.
6 I/O Terminal Block For details, see 2.7 I/O Terminal Block.
7 LAN / PoE Connects to a 10/100 Ethernet or PoE.
8 DC 12V Connector Connects to power.
9 Status LED See Status LED later in this chapter.
10 Zoom Screw
Adjusts the zoom of the camera. This
screw is not available for GV-BX110D
fixed lens type.
11 Focus Screw Adjusts the focus of the camera.
12 Microphone Records the sounds.
13 Auto Iris Connector
If the varifocal lens is in use, plug the iris
control cable to the connector.
Status LED
The status LED is used to reflect the system status of the camera.
Status LED Description
Red Light ON The system powers on and succeeds to
boot up.
Flashing Red and Green
Lights The camera is ready for use with network
connectivity.
Green Light ON Error occurs on the system.