GeoVision GV-BL110D, User Manual, Page: 40 / 393

22
2.7 I/O Terminal Block
The terminal block, located on the back panel of the Box Camera, provides
the interface to one input and one output devices. The I/O terminal block
can be used for applications such as motion detection, event alerts via E-
Mail and FTP, and center monitoring through Center V2 and VSM.
2.7.1 Pin Assignment
The pin assignment for the I/O terminal block:
z
GV-BX110D
Pin Function
1 Input +
2 Input -
3 Output Common
4 Output N/C
1 2 3 4 5
Figure 2-7
5 Output N/O
The GV-BX110D only supports the input device of Wet Contact, 7V ~ 30V.
For the output point, please check if your output device meets the following
Absolute Maximum Ratings before connecting it to the output point.
Breakdown Voltage 277V AC, 30V DC
Continuous Load Current 5A (NO), 3A (NC)
Note: Absolute Maximum Ratings are those values beyond which
damage to the camera may occur. Continuous operation of the camera at
the absolute rating level may affect the camera reliability.