manualshive.com logo in svg

GeoVision GV-BL110D, User Manual, Page: 170 / 393

Share
Download
GeoVision GV-BL110D User Manual Download Page 170

 

 

152 

11.2.5  Wide Angle Dewarpping 

The live view can be curved especially near the corners. Use this function 
to correct the warping of live view. To access this feature: 

 

1. 

Right-click the live view to display the drop-down list and select 

Wide 

Angle Setting

. The Wide Angle Dewarping Setting window appears. 

 

Figure 11-6 

2. 

Move the slider at the bottom to correct the degree of warping. The 
adjusted view is shown the right. Click 

OK

 to close this window. 

3. 

To enable this configuration, right-click on the live view and select 

Wide Angle Lens Dewarping

. 

Summary of Contents for GV-BL110D










































































































































































































































































































































































































Reviews:

No comments