GeoVision GV-BL110D, User Manual, Page: 59 / 393

Bullet Camera
41
4
5. Access the live view and assign an IP address to the camera. For
details, see 10.1 Assigning an IP Address .
6. Adjust angles of the camera body base on the live view. Three shafts
can be adjusted. See 4.4.2 Adjusting the Angles .
7. Loosen the camera’s cover, adjust the focus of the camera and insert
a micro SD card into the SD card slot. See 4.4.3 Adjusting Lens and
Inserting a Micro SD Card .
8. Fasten the camera’s cover.
9. Install the sun-shield cover to the Bullet Camera. For details, see
4.4.4 Installing the Sun-Shield Cover .
4.4.1 Connecting the Camera
Wire Definition
The 7-Pin Data Cable provides connections for power, ground, 1 sensor
input, 1 alarm output, audio input and audio output. The wires are
illustrated and defined below:
Ethernet (PoE)
Digital In (Red)
DC 12V+ / AC 24V + (Brown)
Digital Out (Orange)
DC 12V- / AC 24V - (Black)
GND (Yellow)
Audio In (Red)
Audio Out (Green)
Figure 4-4