GeoVision GV-BL110D, User Manual, Page: 249 / 393

Recording and Playback
231
13
Chapter 13 Recording and Playback
Note this chapter and the function is not available for GV-MFD110
The GV-IPCAM H.264 can record video and audio directly to the memory
card. You can play back the recorded files on the GV-System or over the
TCP/IP network.
Note: See Note for Recording at the beginning of the manual.
13.1 Recording
To enable the recording function:
1. Insert the memory card to the camera. See “To add a memory card”,
12.8.3 Storage Settings .
2. If you like to set up the pre-recording, post-recording or audio
recording, see
12.1.1 Video Settings .
3. If you like to set up the schedule for video recording or I/O monitoring,
see
12.5 Recording Schedule .
4. If you like to configure the areas and sensitivity values for motion
detection, see
12.1.2 Motion Detection .
5. If you want the recording to be triggered by input device, configure the
operation of input device. See
12.2.1 Input Settings .
6. To start recording and I/O monitoring, see 12.4 Monitoring .
The camera will start recording in case of motion detection, I/O trigger, or
during the scheduled time.