GeoVision GV-BL110D, User Manual, Page: 60 / 393

42
No. Wire Color Definition
1 Red Digital In
2 Brown DC 12V+ / AC 24V-
3 Orange Digital Out
4 Black DC 12V- / AC 24V+
5 Yellow Ground
6 Red RCA Audio in
7 Green RCA Audio out
Power Connection
There are two ways to supply power to the camera:
•
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
•
Use the supplied 3-pin Terminal Block and power adapter. Follow the
steps below to connect the Terminal Block and the power adapter.
1. Insert the black wire of the Bullet Camera to the left-side pin of
the 3-Pin Terminal Block and the brown wire to the right-side pin.
Figure 4-5
2. Connect the DC 12V Power Adapter to the 3-Pin Terminal Block.
Figure 4-6
Note: A DC 12V power adapter is provided in the package, but both AC
24V power adapter and DC 12V power adapters are compatible.