General Dynamics CG-1220, Operation And Maintenance Manual

Page: 96 / 134

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
35
NEWLINE
Path: / CONFIGS COMM-PARAM PORT-2 NEWLINE
Type:
Data Editor
Syntax:
NEWLINE [= n] | [D]
Range:
Integer: 0 .. 1
0 Disabled
1 Enabled
Notes:
NEWLINE, when enabled, sends a carriage-return line-feed at the end of the
command line. When disabled, only carriage-return is sent.
OSC FREQ (OPTIONAL-Depending on RF Range)
Path:
/ CONFIGS BANDS BAND-1 OSC-FREQ
Type:
Data Editor
Syntax:
OSC-FREQ [= n] | [D]
Range:
Real: 100.000 .. 15000.000
Notes:
LOCAL OSCILLATOR of the BDC that supports this band. Typical configurations:
S-band = 3750MHz
C-band = 5150MHz
X-band = 6300MHz
Ku-lo-band = 9750MHz
Ku-hi-band = 10750MHz
Ka-A = 16500, Ka-B = 17150, Ka-C = 18250, Ka-D = 19250, Ka-E = 20250
OSC FREQ (OPTIONAL-Depending on RF Range)
Path:
/ CONFIGS BANDS BAND-2 OSC-FREQ
Type:
Data Editor
Syntax:
OSC-FREQ [= n] | [D]
Range:
Real: 100.000 .. 15000.000
Notes:
LOCAL OSCILLATOR of the BDC that supports this band. Typical configurations:
S-band = 3750MHz
C-band = 5150MHz
X-band = 6300MHz
Ku-lo-band = 9750MHz
Ku-hi-band = 10750MHz
Ka-A = 16500, Ka-B = 17150, Ka-C = 18250, Ka-D = 19250, Ka-E = 20250